Misty II Safety Information

Revised: June 30th, 2020

Important Safety Information: Save These Instructions

Warning: When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS.

Warning: To reduce the risk of injury or damage, read and follow the safety precautions in this Legal Guide and the Misty II Reference Manual located at www.mistyrobotics.com/support/manuals when setting up and maintaining your Misty II robot.

Warning: Lithium Ion batteries are extremely hazardous and liable to cause serious injury to persons or property if handled improperly.

Note:
The explanations provided in this guide are for informational purposes only and may be modified by Misty Robotics at any time. The most current version of this Legal Guide can be found at www.mistyrobotics.com/legal. Additional warnings, cautions, notes, disclaimers, and information can be found in the Misty II Reference Manual.

Safety and Handling:
Store and operate your Misty II robot in room temperature environments only as extreme temperatures could damage her. DO NOT disassemble the Misty II visor which may contain a 3D depth sensor equipped with a laser; doing so could cause electric shock, burns, eye damage due to active lasers or other safety risks. Never place your Misty II in water, nor place the wired or wireless charging source in or near water as significant risk of electrical shock to yourself or others and damage to the product and chargers is possible. Avoid getting water on or near the wireless charging pad or wired charging brick. To reduce the risk of damage or injury, do not attempt repairs not specified as End User maintenance in the Misty II Reference Manual and only attempt such allowed End User repairs with the Misty II disconnected from wired or wireless charging apparatus. Attempting to service Misty II yourself, beyond what is specified as End User maintenance, will void any applicable warranty and may result in expensive repairs and or calibrations. For all other servicing questions see our website at www.mistyrobotics.com/support or contact us at [email protected] or 1-720-370-4912. Always disconnect your Misty II from its power supply cord or wireless charging base before cleaning or maintaining it. For additional information, see “Important Safety and Handling Information” in the Misty II Reference Manual. 

Health Considerations: 
Misty II is not a toy and is not intended to be used by children; babies and small children as well as pets should be supervised when Misty II is operating. For a list of several other important health matters see “Health Considerations” in the Misty II Reference Manual.

Batteries and Charging: 
The lithium-ion batteries in Misty II can be hazardous if mishandled. Please see “Battery Warning” in the Misty II Reference Manual for important usage information. Improper battery use may result in fire, explosion, or other hazard. Do not open, crush, heat above 131℉ / 55 ℃ or incinerate. Do not short-circuit the battery by allowing metal objects to contact battery terminals or immerse in liquid. Do not subject batteries to mechanical shock. Note that discarding any batteries in your general waste can be harmful to the environment. For further information on disposing of Misty II batteries or the Misty II robot, see www.mistyrobotics.com/support or contact your local solid waste authority. Do not use unauthorized chargers. Use of an unauthorized charger could cause the battery to generate heat, smoke, catch fire or explode. The Misty II comes with a region approved power supply cord and is designed to be plugged into a standard household or office AC power outlet only. Do not use any other power supply cord. For replacement cords, please contact Misty Robotics support to ensure proper selection of an appropriate power supply cord. Do not use a damaged power supply cord or plug, or a wireless charging base station with a damaged power cord or plug. If the power supply cord or plug is damaged it must be replaced.

Recycling:
Contact your authorized reseller or distributor from whom you purchased your Misty II for instructions on how to recycle your Misty II.

Misty Robotics One-Year Limited Warranty:
This Misty II, except for the motors, as supplied and distributed by Misty Robotics or its authorized resellers/distributors and delivered new, in the original carton to the original purchaser, is warrantied by Misty Robotics to the original purchaser against manufacturing defects in materials and workmanship for a period of one (1) year. The specific terms of the Limited Warranty can be found online at https://www.mistyrobotics.com/legal. To request a free written copy of the Misty II Limited Warranty, please contact us at [email protected], 1-720-370-4912 or 5305 Spine Rd., Unit E, Boulder, CO 80301.

Software:
Your Misty II robot uses proprietary Misty Robotics copyrighted software to control its operation. Parts of this software may contain copyrighted elements that are licensed under the GPL, MIT, and Creative Common licenses, among others. Additionally, your Misty II robot contains proprietary firmware developed and copyrighted by Misty Robotics. Any software contained in your Misty II robot is licensed, not sold. Please refer to the Misty Robotics End User License Agreement at www.mistyrobotics.com/legal for details. For the terms of use of Misty Robotics programming interfaces, see “Developer Terms” at www.mistyrobotics.com/legal.

Support:
You may contact Misty Robotics for support questions at [email protected], call 1-720-370-4912, or visit our website at www.mistyrobotics.com/support.

Regulatory:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) This device may not cause harmful interference.

2) This device must accept any interference received, including interference that may cause undesired operation.

These limits are designed to provide reasonable protection against harmful interference. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference with radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the antenna of the radio/television receiver.
  • Increase the separation between this equipment and the radio/television receiver.
  • Plug the equipment into a different outlet so that the equipment and the radio/television receiver are on different power mains branch circuits.
  • Consult a representative of Misty Robotics, Inc. or an experienced radio/television technician for additional suggestions.

Notice: The FCC regulations provide that changes or modifications not expressly approved by Misty Robotics Inc. could void your authority to operate this equipment.

Industry Canada Notices
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

This product complies with the Canadian Standard RSS-102 for portable RF exposure limits set forth for an uncontrolled environment and is safe for the intended operation as described in this manual.

Contains FCC IDs: 
2AFDI-ITCNFA324; IC: 9049A-ITCNFA324
W23-WCRC503; IC: 24633-WCRC503
W23-WCTC401; IC: 24633-WCTC401

The full text of the Misty Robotics Declaration(s) of Conformity may be obtained at www.mistyrobotics.com/support/articles/9000091303-declarations-of-conformity 

Misty Robotics declares that Misty II is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

Transmit Frequency:
BLE 4.0 (2402MHz – 2480MHz)
802.11 b/n Wi-Fi (2402MHz – 2480MHz)
802.11 a/c Wi-Fi (5150MHz – 5825MHz))

Maximum RF Output Power: <5.5dBi

Wireless Charging Switching Frequency: (6.78MHz) 

© Misty Robotics, Inc.; Misty Robotics and the Misty Robotics logo are all registered trademarks of Misty Robotics Inc. All rights reserved. Patents pending. Other trademarks and trade names are those of their respective owners. For more information about Misty II, visit us at www.mistyrobotics.com.

Designed in Boulder, Colorado – Assembled in China

Misty Robotics, 5305 Spine Rd., Unit E, Boulder, CO 80301, USA